Porta Winch for Stake Pockets – Inward Offset for Track-Mounted Tarps

Versatile Inward Offset Porta Winch

Porta Winches and Porta Anchors offer the ability to turn standard stake pockets into anchor points for your winch straps. These anchors allow you to tie down a load at any of the stake pockets alongside your trailer to accommodate your load as needed.

The inward offset allows for use on trailers with track-mounted tarp systems. If you don’t have a track-mounted tarp, another option is our outward offset porta winch – it sits further out on the trailer.

Why Choose a Porta Winch?

Regular clamp on winches can vibrate loose andratchet straps just don’t allow you to apply the amount of tension a winch and winch bar can. These 3-Bar stake pocket winches offer a legal solution to a common trucking industry problem.

Tensioning

For tensioning, the WSTDA recommends in section 4.3.5 that “When using any winch, the winch mandrel shall have a minimum of two (2) and a maximum of four (4) wraps of webbing. Two to four wraps will appear like four to eight layers of webbing. Less than two wraps may result in strap slippage; more than four will place unnecessary strain on the winch. Excessive straps of webbing on the mandrel may reduce the working load limit (WLL) of the winch and may interfere with proper operation.”

Questions?

Not sure if this winch for stake pockets is right for your application? Call to speak to one of our product experts.

View Product Safety Warnings

California Residents: WARNING