Micro Jig BC-81012 BLADECLEAN Blade & Bit Cleaning System
The BLADECLEAN Blade and Bit Cleaning System is the quickest, safest, and most enjoyable way to clean your saw blades and router bits. This all-in-one kit is compatible with:
- Circular Saw Blades: 7 in. – 12 in.
- Router Bits: 1/4 in., 1/2 in., 6mm, 8mm, 12mm shank sizes
Note: Not compatible with shaper cutters.
Clean Those Blades & Bits Quick
Resident tool expert Doug shows you just how quick and easy it is to clean your blades to make them work just like new. The Micro Jig BLADECLEAN system is as simple as it gets, and takes less than a minute to get your favorite blades back in action and cutting optimally.
Clean Blades = Clean Cuts
Dirty blades and bits put unneccessary stress on your saws and your projects, generating more heat and performing at less than optimal conditions to deliver ideal results. More often then not, this poor performance is mistakenly attributed to a dull blade or bit, when in reality it may just need a bit of cleaning to get back to 100%.
Micro Jig’s BLADECLEAN Blade and Bit Cleaning System offers a quick and safe way to bring life back into your blades and bits, with everything you need included to clean up to 12 inch saw blades and various router bits.
Less Time Cleaning, More Time Building
Cleaning blades and bits can be a tedious and time consuming task, but the BLADECLEAN system shortens the entire job to just a few minutes. Quickly clean one side of your saw blades in a swift and single motion.
The BLADECLEAN system features seals that prevent evaporation of cleaning fluids, but it’s important to note that it’s not a water tight seal. During use and storage, always keep the BLADECLEAN system upright to prevent leakage and spilling.
No Bare Hand Contact with Cutting Edges or Chemicals
A magnetic handle attaches to your saw blades, so skin doesn’t come into contact with cleaning chemicals or cutting edges.
Industrial-Grade Aluminum-Oxide Cleaning Pads
No more wire brushing! The included scouring pad is uniquely suited to reach every nook and cranny of your saw blades in one shot.
Clean a Variety of Router Bits At One Time
Built-in router bit holder lets you soak, clean, and scrub up to five router bits at one time with the included scouring discs.
CMT Woodworking Cutting Tools 998.001.01 Formula 2050 Blade & Bit Cleaner, 500ml Spray Bottle
AN INCREDIBLY EFFECTIVE CLEANER FOR ALL CUTTING TOOLS!
Saw shops know how to get the most out of cutting tools. They also know that pitch and residues that accumulate on tools greatly shorten the life of carbide and compromise performance. CMT’s FORMULA 2050 penetrates the microscopic cracks in the resin and attacks the bond between carbide and steel surfaces and the resin itself. FORMULA 2050 keeps your tools clean and helps you increase lifespan between sharpening and replacement.
- Removes pitch, resin and adhesive residue from all woodworking cutting tools (saw blades, router bits, drill bits, shaper cutters, planer blades, etc.)
- Do not rinse after cleaning. Formula 2050 provides protection from rust and corrosion. Keeps your table saw top rust-free, too!
- Can be applied by spray bottle or used in ultrasonic cleaners and dip tanks
- Important: Prolonged use of this product may cause damage to special coating treatments applied to aluminum tool surfaces. Use with caution.
Unconditional Satisfaction Guarantee
